BLOWERS AND COMPRESSORS FOR MVR PROCESSES
The principle of mechanical vapor recompression (MVR) is used often in evaporators. It is an efficient solution to reintroduce the waste heat as a source of thermal energy for vaporization. In MVR applications our blowers and compressors provide energy recovery by compressing low temperature vapor to a higher pressure and temperature, so it can be re-used as a heating source. PILLER supports you to secure the optimum MVR vapor compressor solution for your process.
Today, PILLER is the technology and market leader in the field of steam compression, using single or multi-stage high-performance blowers. Our expertise of several decades offers a full service from engineering over project management to design and manufacturing.
More than 5.000 blowers for MVR
installed all over the world in various applications from beginning of the 1980´s
Around 500 blowers for MVR
are currently manufactured per year
Export ratio
95 %
ADVANTAGES OF OUR BLOWERS AND COMPRESSORS FOR MECHANICAL VAPOR RECOMPRESSION
Efficiency, flexibility, and reliability for a long lifetime in the process industry
PILLER Blowers and Compressors are specifically developed and designed for Mechanical Vapor Recompression. Our VapoLine achieves an efficiency of up to 87 percent.
They are more flexible, more reliable, require less maintenance, are less sensitive to sub-optimal process conditions, and are more robust than conventional (steam) compressors.
PILLER MVR Blowers and Compressors are impressively powerful despite their compactness. They run with shaft powers of up to 6 Megawatts at impeller speeds of up to 440 m/s. Depending on the particular installation, steam can be compressed to a pressure of up to 20 bar (g).
Using patented bearing technology, engineered high-performance impellers, and a continuous product improvement process, PILLER manufactures MVR blowers and compressors which provide customers maximum efficiency and durability, resulting in lower life cycle costs.
All our activities are guided by our vision "ALWAYS ADVANCING". We act in the awareness of constantly developing our product portfolio for the best performance in all fields.
| Our VapoLine at a glance: |
|---|
|
ALWAYS ADVANCING
MVR BLOWER AND COMPRESSOR TECHNOLOGY FOR THE CHALLENGES OF YOUR PROCESS
PILLER MVR Blowers and Compressors have been used in industrial processes around the world for many decades. As industrial process requirements become more challenging, expertise must keep up with the pace. With our customized solutions at a high technical level, we meet the specific requirements of various industries with our vision "ALWAYS ADVANCING".
WHAT IS SO UNIQUE?
Our quality promise "Made by PILLER" means more than just quality components, materials, manufacturing, and final testing. It also stands for decades of experience and expertise in engineering products for a wide range of process applications. We develop the perfect solution for your process requirements to ensure that our blowers and compressor meet your specific needs. We will always engage you for your customer journey with expert knowledge, competence, and experience.
All developments are tested in our own MVR process plant and are used for quality assurance, endurance tests, and product demonstrations.
THE PILLER VAPOLINE
MVR Blowers and Compressors for a wide range of processes and applications
We specialize in customized solutions, starting with the VapoFlex, our key product. Our product range has grown considerably with the VapoFan covering low mass flows and the VapoMaxX for higher temperature lifts per -stage by using compressor performance.
The range of applications for MVR blower and compressor solutions is constantly expanding through implementation of new technology with our vision "ALWAYS ADVANCING". Today, it is possible to perform a temperature rise (ΔT) of up to 20 K with a single-stage application from PILLER.
Our specialists select the best solution from our PILLER VapoLine depending on your operating conditions and specific requirements.
WHY IS MECHANICAL VAPOR RECOMPRESSION EFFICIENT FOR THE PROCESS INDUSTRY?
REDEFINING THE LEVEL OF REUSING WASTE HEAT IN THE PROCESS INDUSTRY
Large quantities of process steam are required in numerous industrial processes, particularly in the thermal separation of materials and products. Thermal separation processes such as evaporation or distillation are very energy-intensive and therefore also cost-intensive processes.
With the integration of Mechanical Vapor Recompression (MVR), not only energy costs can be reduced, but CO2 emissions can also be lowered. Mechanical Vapor Recompression is not only interesting from an economic point of view, but also in terms of CO2 reduction and the associated reduction in environmental pollution. The applications for MVR technology are almost endless and support you in a wide range of processes and applications to achieve your goals.
MVR blowers and compressors in thermal separation processes
Thermal separation is a widespread technology in many industries. An effective measure to save energy, and to reduce high steam consumption, is the implementation of Mechanical Vapor Compression. This technology is used in a wide variety of applications such as distillation, crystallization and concentration. The waste heat generated by these processes is reintroduced as a heat source back to the process, where the Mechanical Vapor Compression is responsible for the temperature and pressure lift necessary to enable the heat transfer.
By offering the critical components of waste heat recovery processes, we are supporting industries to realize economic and environmental benefits. PILLER also offers system engineering services, including conceptual design as well as support in the Pre-FEED phase. Our Blowers and Compressors are precisely tailored to your vapor application.
Learn more about our wide range of processes and applications
More PILLER Products
Contact
Piller Blowers & Compressors GmbH
Nienhagener Str. 6
37186 Moringen
Germany
+49 5554 201-0
+49 5554 201-271